What exactly does the pressure wave switch of the boom barrier do? What are the benefits of installing it?

Description:

The anti-smashing pressure wave technology of the road gate is a supplementary technology to the ground-sensing anti-smashing technology. It can be used when the ground sensing or other anti-smashing technologies make mistakes, at the moment when the road gate is in contact with the object. Lifting, because the contact part is made of rubber, it can avoid damage to the vehicle; its working principle is that when it senses the tiny air pressure generated by the rubber seal, the sensing film will push the conductive sheet to close the micro switch contact, thereby Play the function of triggering the lever.
The pressure wave of the anti-smashing vehicle of the barrier will automatically raise the rod in a short time after being compressed and deformed, which can not only protect the vehicle but also protect pedestrians and other objects;

Function:

During the working process of the pressure electric wave control technology, when the car or the person is still under the boom barrier gate rod, if the gate rod suddenly changes from the open position to the closed state, when the gate rod falls on the person or the car body, the black air pipe When the pressure electric wave switch is triggered, the barrier will change from the closed state to the open state, and avoid hurting people and cars. Give a certain pressure to the component when the vehicle passes, and the component generates a pulse wave, so it can effectively prevent the occurrence of car smashing incidents.

Principle:

The pressure wave switch control box of the boom barrier is composed of a low-induction pressure wave switch, a control box, and a connection structure system. It has the characteristics of compact structure, small volume, wide pressure range and high precision. When it senses the tiny air pressure generated by the rubber sealing strip, the sensing diaphragm pushes the conductive sheet to close the micro switch contact. The unique waterproof box design of Elefine pressure wave switch makes the switch have perfect protection and can adapt to various harsh outdoor environments.

The pressure wave of the anti-smashing vehicle of the barrier is composed of a pressure wave switch, a gas pipe, a plug, and an anti-smashing rubber strip. The anti-smashing rubber strip is composed of an airbag and an aluminum strip;

Installation steps of anti-smashing vehicle pressure wave switch for barriers:

• 1. Fix the aluminum bar to a suitable position, and drill holes on the barrier rods with a hand electric drill.
• 2. Fix it with rivets or self-tapping screws. (It is recommended to punch 3 holes per meter).
• 3. Put on the rubber strip along the aluminum trough.
• 4. There is a hole plug at one end of the gate, and a non-hole plug at the other end.
• 5.1-meter transparent tube penetrates the plug with a hole, and the trachea protrudes approximately 2 cm.
• 6. First connect the hose, and then fix the pressure radio switch in the appropriate position in the barrier.
• 7. Connect the two lines of pressure wave (regardless of the positive and negative poles) to the corresponding common end on main board (ground wire) and the pressure wave end (anti-smashing, protection line) of the boom barrier gate.
• 8. Assemble the barrier rods to realize rebound when encountering obstacles and prevent smashing by people and vehicles.