What are the factors that cause the deviation of the stainless steel electric retractable door?

• First of all, it is necessary to know whether the stainless steel electric retractable door is monorail or trackless, and then to determine whether the motor chain is loose. If the chain is found to be loose, adjust the motor chain at this time.
• Then check whether there are any problems with the motor and the control system, including the setting of the control system parameters. If the door body is relatively tight, it will lead to improper assembly of the door body and poor operation. At this time, you only need to adjust the tightness of the main frame of the door body.
• Next, we have to see whether the weight of the head bottom plate is just right, because many small manufacturers now replace the heavy head bottom plate in order to reduce costs. For example, a 15-meter door is equipped with a standard 8 cm board, but only a 3 cm board, so this will cause the nose to lose weight and cause problems.
• In fact, not all the door styles of stainless steel electric retractable doors are suitable for trackless, but some small manufacturers who are not professional will think that any style can be made, thinking that there are no restrictions, but in fact, there are technical regulations. The most important thing is that the door head of the door body must be parallel. In addition, the ground problem needs to be considered. This is also a very important issue. If the ground is inclined or uneven, it will cause the stainless steel electric retractable door to deviate.
• In addition, you have to check whether the guide of the stainless steel electric retractable door is damaged. If the ring is damaged, it needs to be replaced. If the motor drive power is not enough or the door row is too tightly arranged, it will also cause the machine head to run difficult, so it is recommended to adjust the tightness of the door row. There is another possibility that the machine head was pushed artificially. In this case, the retractable door can return by itself without any adjustments. In the case of trackless operation, the number of magnets may be too small or the spacing is too large. The reason is that it is recommended to add a magnetic rod.