Lead screw: Domestic 2510 high precision lead screw
Transformer: 800W pure copper transformer
Electrical device: Delixi, Chint
Bed frame: Thickened, sprayed, six feet with horseshoes
Longmen: Large gantry, gantry thickness 8mm, feed height 200mm
Chassis: Built-in chassis, small cabinet, large cabinet, can be customized
Running speed: 12000mm
Engraving instructions: G code
Software running host: XP system with PCI card slot
Limit: Photoelectric limit
Oiling: Manual oil filling
Random belt: Software, Wentai, fixture, data cable, trial tool, water pump, small water tank.
Features:
1. Spindle motor
The main shaft is driven by double motors, with a large amount of weight, and double-tooth transmission is adopted for extended use, and the operation design is user-friendly.
2. Counter tops
Strong adsorption, good bearing capacity, stable performance, stable application and long application time.
3. Motor
Main shaft adopts 450B motor, XY axis adopts 450A motor, (stepper, servo, hybrid servo, AC servo can be selected according to customer requirements.
4. Ball screw
Exquisite ball nut screw, its main function is to convert rotary motion into linear motion, and torque into axial repetitive force.
5. Body and appearance
It adopts a seamless welded one-piece body, and the appearance is simple and in line with the aesthetic design.
6. Oiler
The numerical control electromagnetic oil pump keeps the machine lubricated without the need for cumbersome receiving operations, ensuring the smooth operation of the machine, saving trouble and not wasting oil.
7. CNC system box
Simple and easy to operate, equipped with an independent power distribution cabinet, which can avoid interference, the line is stable, and it can be moved at will.
Detailed introduction of the key functions of the woodworking engraving machine:
1. Start to pause: When the processing file has been loaded, if the system is in an idle state, press this key, the system will pause the processing.
2. Stop: Stop the current operation. If the system is in the processing state, press this key to stop the processing; if the system is in the floating tool setting state, press this key to stop the floating tool setting.
3. Continue at break-point: If the system is in the processing pause state, press this key, the system will continue processing at the break-point.
4. Continuous: Switch user data input to manual continuous.
5. Spindle switch: If the spindle has been turned off, press this key to turn on the spindle; otherwise, turn off the spindle.
6. Return to origin: press this key, the system executes the command of returning to the origin of the work piece.
7.X1: Press this key to set the jog step to 0.01mm.
8.X10: Press this key to set the jog step to 0.1mm.
9.X100 Press this key to set the jog step to 1mm.
10.X+: Move the tool to the positive direction of the X axis. For example: in the continuous jog state, jog continuously in the positive direction of the X axis, otherwise, move forward one step in the positive direction of the X axis according to the current step size. Notice:
If it is in continuous jogging state, single press this key, the tool will jog continuously at manual low speed, press and hold the combination key of the shift key and this key (press and hold the shift key and then press this key, at this time the shift key will not
to release), the tool is jogged continuously at high speed manually.
11.X-: Move the tool to the negative direction of X-axis. The moving speed, step size and key combination are the same as those of X+.
12.Y+: Move the tool to the positive direction of the Y axis. The moving speed, step length and key combination are the same as those of X+.
13.Y-: Move the tool to the negative direction of the Y axis. The moving speed, step length and key combination are the same as those of X+.
14. Z+: Move the tool to the positive direction of the Z axis. The moving speed, step size and key combination are the same as those of X+.
15.Z- Move the tool to the negative direction of the Z axis, the moving speed, step length and key combination are the same as those of X+.
16. Shift: Pressing this key alone has no function. Only when this key is pressed in combination with other keys has the corresponding function. Please refer to the description of other keys for the type of combination.
17. Tool setting: the second key from the left of the fifth row of the special keypad, press this key, the system will perform floating tool setting.
Download Brochure
