Tripod Turnstile Gate Operator PCB Control Circuit Board

Description:

Tripod turnstile control board is compatible with about 98% of the tripod turnstile gate machines on the market. The control board can be used for two-way traffic, power off and falling bar, LED direction indication, brake opening signal, etc.

Specifications:

• Model No.: EF-TC100
• Product name: RSs485 control board for tripod turnstile
• Power supply: AC220V/110V
• Certificate: CE
• Working environment: -45℃-60℃
• Type: Spare Parts
• Support: Access Control System
• Function: Tripod Turnstile PCB Control Board
• Size: 99*99mm
• Material: PCB
• Power input: AC100-240V, 50/60HZ
• Working voltage: 24V
• Working humidity: 30%~95%
• Communication interface: RS485, Dry contact
• Mechanism: Mould machine core+mould bracket+Domestic solenoid
• Warranty: 1 Year

Technical Parameters:

• 1) Power supply voltage: DC24V, 50HZ
• 2) Working environment temperature: – 10 ℃, 60 ℃
• 3) Relative temperature: no condensation less than 95%
• 4)Maximum channel width is 510mm
• 5) Traffic speed: 30-40 people/min (IC card)
• 6) Electromagnet: 20W/2W

Operating instructions for system parameter setting:

Tripod turnstile gate control board wiring instructions:
First set the type of gate (two types of power off, power of free access).
Power off the pole: When power is off, the top pole will automatically fall, pedestrians can be free to pass. After the call first press the bar, then raise the bar, the bar will automatically lock.
Free passage after power off: when the power is off,the mechanism will not lock, pedestrians can freely push into it. After the power is on, the mechanism will be automatically locked ,pedestrians must swipe their cards before passing.

Setting instructions of parameters:
After the control panel is powered on, the LCD screen will display the default state, and the default state will display the control panel and the number of entries.
Control panel keys: “MENU” key, “INC” up key, “DEC” down key, 3 operation keys

Key Instructions:

“MENU” button:

1: Long press this button in the standby interface to enter the system menu
2: In the system menu interface, you can enter the parameter setting interface
3: Save the parameter settings, and then exit the system menu interface
“INC” button: Select parameter up
“DEC” button: Select parameter down
NOTE: In the system menu and menu setting interface, if there is no key operation in 5S, the system will automatically exit the menu interface