Talk About the Application of Vehicle Entry and Exit Management Systems

Lifting column manufacturers talk about the application of vehicle entry and exit management systems

The following people will introduce to you, I hope our introduction can help you well.

• 1. Column lowering: After passing legal verification, after the control unit receives the switch, it drives the lifting column to lower, keeping it parallel to the road, and releases the vehicle. Can be divided into button type and access control type;
• 2. Raise the column: After the legal vehicle passes, the control unit will drive the lifting column to rise after receiving the switch. The giving type can be button type and access control type;
• 3. Protection: When a vehicle stops on the lifting column, the column does not rise. The priority of the protection type is higher than that of the ascending command; however, the protection of passing vehicles cannot be achieved through protection systems such as infrared and ground sense.
• 4. Power off release: After power off, the lift column automatically releases the channel. It can continue to work for several cycles depending on the retained air pressure (the specific number of cycles is related to the selected control unit and the number of cylinders). The whole system can control the entry and exit of vehicles in the aisles of ordinary width, and is suitable for the control of vehicles in and out of the aisles with wide gates. At present, if the passage of 6 meters is passed, there is no good product suitable for the control of vehicle passage in and out, while the buried coil type long-distance card reading system is suitable for the management of vehicle access in wide passage. When not controlled, it is flush with the ground, with no blocking, no reading head, no camera, and only lifting column blocking when controlled, which is suitable for places with strict control.
• 5. The cost of the lifting column is higher than that of the road gate. Yes, the columns are all tens of thousands of yuan. They are mainly used to control the passage of road vehicles. They are designed for the intrusion of non-allowed vehicles in the area, and have high security. It is much more convenient than the expansion and contraction of the telescopic door, and it is much wider than the channel controlled by the gate.