Average luminous intensity: ≥3000cd/㎡ No glare, high transparency
Relative humidity: 10%~95%
Material: polymer composite material (surface anti-skid design)
Single brick load bearing: >50 tons (pressure resistance, earthquake resistance)
Working temperature: -40℃-100℃
Waterproof grade: IP68
Weight: 27KG (including base)
Removable base with 5mm thick floor tiles to enhance compression resistance and easy disassembly
Smart Zebra Crossing Luminous LED Brick Light (removable) Features:
Pressure resistance: full pressure resistance process
Waterproof: Five layers of waterproof design inside and outside
Stable
Easy installation and disassembly:
Detachable design, easy to replace without effort
5mm thick base to enhance the compressive and waterproof performance of floor tiles
Low power and stable voltage
Round head lamp beads with high brightness
Simple wiring, more worry-free
Five layers of waterproof details:
1. Internal and external double waterproof joints
2. Base leak hole
3. The base is filled with waterproof glue
4. The floor tiles are filled with waterproof glue
5. The back of the floor tile is also filled with waterproof glue
Installation:
Use one controller for each direction, and connect 5 LED brick traffic lights to each main line. Take an intersection like the picture below for example, it will use 160pcs LED brick traffic lights and 4 controllers.
Step 1: Dig the hole underground as show below. The slotted position is generally at zebra crossing position.
Step 2: If the slotted is too thick when grooving, fill it with a fine cement slurry.
Step 3: Put the light bar into the cement tank, the line can go from the bottom of the embedded light bar, all connected to the power control box. Convert AC85-265V input to DC24V output.
Traffic Signal Controller Box:
Controller Specifications:
Size: 500*1200 mm
Input voltage: AC85V~AC265V, 47Hz~63Hz
Output voltage: DC24V
Output current: 7A
Output power: 350W
No-load power: ≤0.5W
Working mode: long light, flashing, 1, 2, 1, 2 beating flash and other flashing modes