info@elefinetech.com Tel:+8613534079085
Boom barrier, Turnstile, Swing Turnstile, Fast Speed Turnstile, Parking System, Face Recognition Terminal, Face Reader, Temperature Measuring, Infrared Sensor, Mechanism, Motor, QR Code Reader, IC Card Reader
en
Products
Exhibition
New Promotion Boom Barrier Gate
New Promotion Boom Barrier Gate Up to 30% OFF
Elefine Brochure 2022
Shenzhen Elefine Technology Co., Ltd. Brochure 2022
Speed Bump Style Hydraulic Tyre Killers for Parking Lot

Speed Bump Style Hydraulic Tyre Killers for Parking Lot

Model No.: EF-TK004

  • Thickness of spikes: 10mm
  • Thickness of panel: 12mm
  • Actuator: Single
  • Rising time: 1-2s
  • Dropping time: 1-2s

Speed Bump Style Automatic Hydraulic Tyre Killers for Parking Lot

Description:

Tyre killers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high-security requirements. If there is a threat of vehicle attack in addition to the control of vehicle access in high-security applications, the tyre killer is one of the most secure systems. Even though the attack is from high tonnage vehicles with high speeds, there is no chance for the vehicle to keep on moving because of the damage given to wheels and the rim of the vehicle.

Hydraulic Tyre Killers Features:

  • Typical raise/lower time is 3 seconds
  • In case of emergency, raise/lower time can be as low as 1.5 seconds
  • Can be Controlled by any kind of card readers, biometric readers, radio control, on/off key switch with PLC Controller
  • IP 55 Protection is available
  • Easily to be integrated with inductive loop detectors, flashing lights or red/green traffic lights
  • Can withstand 60 tons of axle load
  • Typical weight of a tyre killer is 1-1.5 tons (depending on tyre killer type and accessories)
  • Backed up with a manual pump to support the hydraulic drive unit in case of power failure

Technical Specifications:

  • Model No.: EF-TK004
  • Height of spikes (Rising): 120mm (Uni-directional)
  • Thickness of spikes: 10mm
  • Thickness of panel: 12mm
  • Axis: Dia.25mm, 45#steel – solid
  • Actuator: Single
  • Rising time: 1-2s
  • Dropping time: 1-2s
  • Manually rising/dropping: Yes
  • Power supply: 220V AC
  • Power consumption: 200W~400W
  • Dimension

– Length: 2~6m (On request)
– Width: 550mm (Uni-directional)
– Height (While dropped): 80mm

  • Color: Yellow/Green/Red
  • Color of reflective tape: Yellow/Black
  • Control center: Spray paint (Outdoor use)
  • Remote control distance: 100m
  • Wire switch: Optional
  • Traffic light linkage control: Support

Standard size: (mm)

L3000*W520*H70, Rising Length:150
L3500*W520*H70, Rising Length:150
L4000*W520*H70, Rising Length:150
L4500*W520*H70, Rising Length:150
L5000*W520*H70, Rising Length:150
L5500*W520*H70, Rising Length:150
L6000*W520*H70, Rising Length:150

More customized sizes supported

Why You Should Install Hydraulic Tyre Killers at Your Parking Lot ?

Tyre killers are basically spike barriers that operate on the principles of hydraulics. These are especially useful in places which demand high security and round-the-clock surveillance. Hydraulic tyre killers are usually put at entrance & exit points of a property and are made up of heavy duty spikes that rise from the ground.

A hydraulic tyre killer is especially a useful addition after the exit points of a parking lot. Consider a scenario where a thief breaks into a car parked at a parking lot. Now the thief doesn’t have the parking receipt which one needs to show to the exit booth employee in order to leave the premises. In such a situation, the thief will try to smash the automatic boom barrier and if successful, will be able to leave the property with the stolen car. However, if the parking lot owner has a hydraulic tyre killer installed after the exit point, the employee can simply press the button as soon as the thief crosses the exit point which will immediately raise the spike barriers and (a) make the thief stop the car before it reaches the tyre killer or (b) slash the car tyres if the thief doesn’t stop and thus, preventing the theft of the vehicle.

Neptune Automatic’s hydraulic tyre killers are products of years of in-depth research and quality assurance and are ideal for premises where security is number one priority. They prevent unauthorized access to and from the property and can be seamlessly integrated with our proprietary Parking Management System.

Apart from parking lots, our tyre killers have found application across various high security areas across the country such as airports, government offices, financial institutions, private VIP residences, central jails etc. Some of Neptune’s esteemed clients include Indira Gandhi International Airport (Delhi), NDMC (New Delhi Municipal Council) parking lots, DRDO (Defence Research and Development Organisation), ICICI Bank and McDonald’s.

Installation Sites:

Speed Bump Style Hydraulic Tyre Killers for Parking Lot

Speed Bump Style Hydraulic Tyre Killers for Parking Lot

Speed Bump Style Hydraulic Tyre Killers for Parking Lot

Speed Bump Style Hydraulic Tyre Killers for Parking Lot

Speed Bump Style Hydraulic Tyre Killers for Parking Lot

Tyre Killers Production Line Video:



Leave a Message