Home Secure 125Khz RFID Reader Door Access Control System Plastic Waterproof Proximity Card Reader

Parameters:

• Model No.: EF-CR01
• Surpport Card: EM ID Card or EM Cpmpatible RFID Card
• Power Requirements: 9-15V DC at 150mA, A linear regulator is recommended(NOT included)
• Interface: Wiegand
• Reader Range: Up to 8cm
• Frequency: 125KHz
• Operation Temperature: -20°C TO 60°C
• Operation Humidity: 5%-95% (non-condensing)
• Audio/Visual Indication: Green and Red and Buzzer Signal Output

Technical Specification:

• Inductive speed: quick card punching <0.1 sec
• Protection circuit: Photovoltaic seclusion OC output
• Data line transmit distance: the distance connected with the controller can
• Reach 30-200mm (The larger the area of the conduct line, the longer the transmit distance)
• Connection line: educed by standard 4 digit 2140 plug line or 4-core shielding line, excellent anti-interrupt ability
• Working state: sound and light indicate the working state, staying flash red light; scanning card flash green light
• Output mode: standard Wiegand 26BIT (RS485/RS232 with other BIT digit output modes based on the large quantity can be produced according to the specific demands)
• Static current: 30-80mA/current with card drive relay, buzzer <100mA
• Instant interrupt absorb: >2000V/600W/100Us
• Swift-pulse group anti-interrupt ability: +/-2kV, 5kz, power supply with all output and input port
• Anti-noise ability: +/-2kv, power supply with all output and output port
• Voltage: DC9V-15V
• Static electricity discharge anti-interrupt ability: +/-6kv contact discharge, +/-8kv Air discharge, all outside technical parts and ports
• Output mode: standard Wiegand 26BIT

Features:

• EM compatible proximity card reader.
• It reads the EM card ID card identification number.
• Transmits it to the access control system with Wiegand 26 interface.
• Waterproof for outdoor use.
• With LED/ buzzer function.

Installation:

This card reader cannot work alone. It needs to be connect with access controller or time attendance or access control board device.

Wiring:

• Red: Power 9-15V
• Black: Power ground
• Green: Wiegand output D0
• White: Wiegand output D1
• Blue: Green LED control
• Yellow: Buzzer