High-tech Brushless Motor Intelligent Channel Sliding Barrier Turnstile Gate for Management of Personnel Channels

Description:

• Sliding Barrier is an intelligent channel management device that has been carefully developed, developed and produced for many years. It is controlled by a brushless motor, and its gates are opened quickly and smoothly. It is mainly a high-tech product for intelligent management of personnel channels. The equipment organically integrates machinery, electronics, microprocessor control and various identification technologies. By matching various identification system equipment and adopting reliable safety protection devices, alarm devices, direction indicators, and extended friendly The unique LED counting display interface coordinates and realizes the intelligent control and management of channels.
• Sliding Barrier can be easily compatible with the use of IC cards, ID cards, barcode cards, fingerprints and other card-reading and identification devices, providing a civilized and orderly way of passage for personnel entering and exiting, and effectively managing personnel entering and exiting. It can be widely used in stations, docks, subways, factories, buildings, intelligent communities, hotels, clubs, enterprises and institutions, etc. where intelligent management of channels is required.

Specification:

• Model No.: EF-ST6612
• Chassis material: 304 stainless steel/paint
• Working voltage: AC220±10%V 50±10%HZ 100W
• Drive motor: brushless motor
• Dimensions: 200 long * 600 wide * 1200 high (MM) chassis thickness (1.2MM)
• Swing arm length: 480MM
• Channel width: 1000MM
• Traffic direction: one-way or two-way (can be set)
• Working environment: indoor, outdoor (shade) -10℃～50℃ Relative humidity: ≤90%, non-condensing
• Gate opening and closing time: 1 second
• Traffic speed: 25-30 people/minute (normally closed) 40 people/minute (normally open)
• Time required to enter the passing state after power-on: 3 seconds
• Swing arm material: Swing arm acrylic plate thickness (10MM)
• Control method: face recognition machine, built-in card swiping panel (external card swiping device can be installed with installation accessories)
• Normal service life: more than 50 million times
• Communication interface: relay interface, distance ≤ 1200 meters, defined parameter manual
• Input interface: relay switch signal or 12V level signal or 12V pulse signal with pulse width > 100ms, drive current > 10mA

Feature:

• 1. It has the function of fault self-check, fault prompt and abnormal alarm, which is convenient for users to maintain and use.
• 2. Through the built-in small button on the main control board, the operating status of the programmable device can be programmed.
• 3. This type of anti-collision swing gate is a new brushless motor rotating movement, which has more cost-effective advantages than brushless motors on the market.
• 4. Coding program limit, accurate and efficient.
• 5. Sound and light alarm function. It is convenient to prompt the administrator.
• 6. Prompt function. Buttons can be edited into voice module to prompt selection, more effectively prompting pedestrians to pass.
• 7. Display counting display function.
• 8. Lighting effect.
• 9. Illegal intrusion, tailgating alarm, reverse intrusion gate is automatically closed.
• 10. The swing arm can be adjusted synchronously (for the case of double swing).
• 11. It has an automatic reset function. After the gate is opened, if the pedestrian does not pass within the specified time, the system will automatically cancel the pass permission of the pedestrian. The reset time is adjustable from 1S to 60S (the default time of the system is 10S). The rear channel is automatically opened (according to fire protection requirements), and the power-on channel is automatically closed.
• 12. Infrared sensor reset, infrared sensor anti-pinch function, the product comes standard with 8 pairs of infrared.
• 13. It has a standard fire alarm input interface, and the device will be opened first after receiving the fire alarm signal.
• 14. The super bright direction indicator board prompts the traffic status.
• 15. It can be connected with various equipment such as access control system, consumer system, electronic ticket system, biometric identification system, and electrostatic tester.
• 16. One-way or two-way control personnel can enter and exit, and the infrared sensor enters and exits the channel.
• 17. Remote control and management can be realized directly through the management computer.

Sliding Barrier Turnstile Gate Factory Test Video: