High Precision 0.10mm~40.00mm Pin Gauge Set

Model Number: EF-PG

Product name: Pin measuring needle gauge (pin plug gauge)
Material: bearing steel (Gcr15)
Measuring range: 0.10mm~50.00mm
Length: 50mm
Accuracy: ±0.001mm
Hardness: 0ver 650 HV

High Precision 0.10mm~40.00mm Pin Gauge Set

Specifications:

Model Number: EF-PG
Product name: Pin measuring needle gauge (pin plug gauge)
Material: bearing steel (Gcr15)
Measuring range: 0.10mm~50.00mm
Length: 50mm
Accuracy: ±0.001mm
Hardness: 0ver 650 HV
Other Material: Tungsten steel, Bearing steel
Usage: Measuring Diameter
Application: Working Gauges
Customize: Allowed
Applicable industries: used to measure the size, distance, and depth of holes, and can be used in industries such as electronic version, circuit board, mold and other precision instrument manufacturing.
Advantages: high hardness and wear resistance, rust-proof packaging, ultra-high precision.

Note: After unpacking as a measuring tool, it will affect the secondary sales, so the needle gauge will not be returned after unpacking. In order to prevent rust after the needle gauge is used, the needle gauge can be soaked in kerosene or butter to prevent rust , Just wash it next time you use it.

High Precision 0.10mm~40.00mm Pin Gauge Set

Application:

1.The pin gauges are used to measure the bore diameter, hole distance, pitch diameter of the thread, etc. Especially suitable for measuring the width of curved groove & the size of mold.
2.Used to check the location, measuring the size of the hole, check the hole distance.
3.It also can be used as stop-pass gauge, and measure the depth of the hole.
4.It is widely used in electronic board, circuit boards, molds, precision machinery manufacturing, and various kinds of advanced technology area.

Parameters:

1. Size range: 0.10mm~40.00mm
Spacing: 0.01mm
Precision: ±0.001mm
2. Non-standard size can be customized
Material: Tungsten steel, SHJ(Bearing Steel)

High Precision 0.10mm~40.00mm Pin Gauge Set

Technical parameter:

Overall length: 50mm
Step: 0.01mm
Diameter precision: +0.001mm
Hardness: 0ver 650 HV
Heat treatment: HRC60~63
Roundness: 1.27um
Roughness: Ra0.20

Feature:

1. Actual value of the specific area is marked on pin gauge
2. Black Oxide treatment
3. Box and gauges clearly marked
4. No sharp edges
5. Your choice of plus or minus
6. Standard Certificate

High Precision 0.10mm~40.00mm Pin Gauge Set

Application method:

1.Use pin gauge: Hold the Measured parts by left hand, hold the pin gauge by right hand, put the pin gage into the measured round hole vertically.

Attention, don’t overpower, unwise, it will damage the pin gauge or make the measurement data is not accurate.

2.Choose pin gauge,according to the hole diameter of the measured parts on the drawings, firstly choose the smallest pin gage within the diameter range.

For example, if the hole diameter is 3.00+0.005mm, you should choose the 2.950 pin gauge, if the 2.950 pin gauge cannot put into the hole, please choose a smaller one.

3.The reading of the pin gauge: the precise reading is as the pin gauge shows.
4. After using, the pin gauge should be in place and properly kept.