info@elefinetech.com Tel:+8613534079085
Boom barrier, Turnstile, Swing Turnstile, Fast Speed Turnstile, Parking System, Face Recognition Terminal, Face Reader, Temperature Measuring, Infrared Sensor, Mechanism, Motor, QR Code Reader, IC Card Reader
en
Products
Exhibition
New Promotion Boom Barrier Gate
New Promotion Boom Barrier Gate Up to 30% OFF
Elefine Brochure 2022
Shenzhen Elefine Technology Co., Ltd. Brochure 2022
Hand Held Body Metal Detectors Light / Voice Alarm Essensive Metal For Goverment
  • Hand Held Body Metal Detectors Light / Voice Alarm Essensive Metal For Goverment
  • Hand Held Body Metal Detectors Light / Voice Alarm Essensive Metal For Goverment
  • Hand Held Body Metal Detectors Light / Voice Alarm Essensive Metal For Goverment

Hand Held Body Metal Detectors Light / Voice Alarm Essensive Metal for Goverment

MD-3003B1

  • 1. Detection sensitivity: diameter 2.5mm ball
  • 2. Power supply: 9 volt battery (6F22ND) (not included)
  • 3. Power consumption: 270mW
  • 4. Operating frequency: 22KHz
  • 5. Working current: less than 50mA
  • 6. Working temperature: -10°C~+55°C

Hand Held Body Metal Detectors Light / Voice Alarm Essensive Metal For Government

Introduction:

This is a high performance Hand Held Metal Detector designed to meet the exact requirement of the security industry.

Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected.

Hand held metal detector features:

  • 1. Easy to operate, packaged with leather case for carrying
  • 2. Without enough voltage, the indicator light would not shine or alarm
  • 3. Has light and sound vibration alarm prompted the dual mode
  • 4. First use of automatic reset to switch the sensitivity function, it could check the large essensive metal but too small metal objects

Parameters:

  • 1. Detection sensitivity: diameter 2.5mm ball
  • 2. Power supply: 9 volt battery (6F22ND) (not included)
  • 3. Power consumption: 270mW
  • 4. Operating frequency: 22KHz
  • 5. Working current: less than 50mA
  • 6. Working temperature: -10 -55
  • 7. Model No.: MD-3003B1

Advantages:

  • HIGH SENSITIVITY: Small hidden metal objects can be detected by this handheld metal detector wand. Perfect to use for indoor and outdoor events, Can be used this metal detector for airport, station, school and crowded public place to increase security, and it’s not only your good helper to accurately find coins, jewelry even small pins in your garden, also a good finder to detect nails for woodworking else
  • KINDS OF ALERTS: Sound or Vibration Alerts can be used for security wands, meet your needs on different occasions. The LED light will be activated to detect metals.
  • POWER SUPPLY: This handheld security scanner powered by one 9V battery standard (Not included) or rechargeable battery (Not included). With one external charging port, the battery charger is not included. Please avoid charging it when you have no rechargeable battery, otherwise it can’t work normally
  • COMFORTABLE HANDLE: The metal detector wand is lightweight designed with comfortable handle grip, no matter use for long periods of time. To easy carrying the metal scanner, a holster with belt loop is included.
  • LOW POWER CONSUMPTION: This metal detector hand wand can work for 40 hours continuously.

Operation:

This metal detector operates on one 9 volt standard or rechargeable battery. To install the battery, slide off the battery cover and place the battery into its compartment while matching the +/- symbols.

Turn the detector on by pushing the on/off switch until it clicks on and the green LED is lit. The scanner detector is now operational.

Holding the metal detector scanner with the detection face towards the surface, sweep backwards and forwards continuously at a height of 10-30 mm above the area to be scanned

The presence of metal will be indicated by the audio warning tone and the red light coming on. If the detector is held still over a metal object, the detection signal will automatically reduce, therefore it is important that the unit is continually scanning the surface when is use.

Package list:

  • 1 * Security scanner metal detector (L:16.25¡±*W:3.25¡±*H;1.6¡±)
  • 1 * Belt holster
  • 1 * English user manual

Note:

  • 1.Be sure to switch off the power after use
  • 2.Battery shall be taken out when the metal detector will be kept unused for long
  • 3.No sound will be produced when the probe is fixedly positioned to the metal object. Sound is produced only when the probe crosses the metal object
  • 4.Be sure to switch off the power when the battery is recharged
  • 5.Charger voltage: 9V for AC; 10V for DC. (the charger shall be self-provided)

How to Use Hand Held Metal Detectors Effectively?

Hand held metal detectors offer an inexpensive means of scanning persons for concealed knives and other weapons, foil wrapped drugs and a wide range of other metallic objects.

But there are a few important things that the operator must consider whilst using them.

  • 1. What type of objects are you looking for?

Knives or other weapons? – a general purpose scanner should be sensitive enough, but choose a unit from a reliable manufacturer / supplier.

Looking for smaller items? – a very high sensitivity unit may be required – and care must be taken when setting the sensitivity levels of the metal detector before use.

Note: Budget price units can produce erratic results, are prone to early failure and typically offer poor battery life performance, …so any initial cost saving could be quickly eroded where the unit is used for more than just the odd occasion.

  • 2. Who will be scanned?

– Everyone?

– Just selected persons?

How will the selection be made as to who to scan without risk of being accused of discrimination? (Note: a Random Search Selector from Insight Security will de-risk and easily resolve the selection problem).

– How will you handle people in wheelchairs?

  • 3. What procedures apply / what course of action will you take when an object is detected?

It’s important to ensure that clearly defined procedures are put in place to define exactly what actions will be carried out when various objects are discovered. Operators need to be fully trained to ensure familiarity with defined procedures.

How to Scan a Person’s body Quickly and Efficiently

It’s vital that operators know how to efficiently and effectively scan people without touching them or causing offence.

Touching the body of the person being scanned could land the operator in trouble. It could cause offence, or in the worst case, could even lead to legal prosecution.

 

Application for the hand held metal detector:

  • 1. Security check: such places are prohibited to take guns and knives as police station, factory, courthouses, stadium, public buildings, private buildings, etc.
  • 2. Loss prevention: such places needs to prevent from stealing as chemical, refineries, electronic, metal, plastic industries.
  • 3. Preventing cheating: such occasions need to shield signals of Mobile phones, electronic dictionaries, MP3, MP4, U cards, and wireless transmission facilities to prevent cheating as college entrance examination, tests, and civil servants exams.

Trade Terms:

Sample availability: yes

MOQ: 1pcs

Lead time: samples are ready in stock, 4-10 working days for bulk order

Shipping: by sea, air, express

Handheld Metal Detector Test Video:



Leave a Message