Ground Paved Portable Remote Controlled Traffic Blocking Roadblock Speed Bump Tire Killer with Hollow Needles

I. Overview

The portable remote-controlled traffic-blocking roadblock is composed of high-performance reinforced plastic blocks and stainless steel deflated hollow needles. It adopts an electromechanical integrated remote control device, which is easy to operate, safe and reliable. It can be set up at any time, mobile deployment, and does not affect the normal smooth flow of roads. It is the relevant department It is an indispensable advanced equipment when it is necessary to set up a card to intercept a vehicle.

2. How to use

• 1. Before use, make sure to charge the battery in the remote control box for enough time to keep the voltage of the power supply between 11V-13.5V.
• 2. On the road section where interception tasks are required, open the right side cover of the roadblock packaging box, roll out the roadblock roll, remove the elastic hooks used to fix the roadblock, lean on the side of the road, and roll towards the road where the vehicle is to be intercepted noodle.
• 3. To connect the wiring between the remote control box and the barricade head, insert one end of the two-meter three-core connecting cable into the barricade head connection jack, and the other end into the remote control box “barrier output” connection jack.
• 4. Open the upper cover of the remote control box, pull the power switch to the built-in power supply, the power indicator light is on, and the device enters the working state. Pull out the left receiving antenna and erect it to increase the receiving distance.
• 5. When it is necessary to perform the task of intercepting vehicles, long press the button of the remote control, a “beep” sound will be issued in the power box, the intercepting indicator light on the power box will be on, and the stainless steel hollow needle in the roadblock block will automatically stand up. , the wheel will be pierced with several stainless steel broken tire hollow needles, and the tire will deflate immediately within two seconds, and it cannot continue driving, but can only stop.
• 6. After the interception task is over, release the button of the remote control, and the erected stainless steel hollow needle will turn back to its original position and enter the standby state.
• 7. Recycling of the remote control roadblock, roll up the roadblock, fix the roadblock with an elastic hook, turn off the “power switch” of the remote control box, put the remote control box into the middle space of the roadblock, and hold the roadblock with your left hand Box body, roll the block with the right hand into the box, put in the connecting cable, and fasten the box cover.
• 8. This remote control roadblock is also equipped with an external power supply connection. When the power supply voltage in the remote control box is insufficient and cannot work normally, one end of the car connection cable can be inserted into the “external power supply” connection jack of the remote control box, and the other end can be inserted into the 12V Car cigarette lighter jack, pull the power switch of the remote control box to the position of external power supply, the operation is the same as the above method.
• 9. Charging. The power box is equipped with a voltmeter to display. When the power supply undervoltage is lower than 10.5V, the undervoltage indicator light is on, and it needs to be charged at this time. When charging, plug one end of the charging power cord into the 220V mains, and the other end into the “AC input” jack of the power box, the charging indicator light is on, the charging is normal, and the charging time is 8-10 hours.

3. Main technical indicators

• Model No.: EF-PTK19
• Barrier effective length: 3000 long x 240 wide x 30 thick (mm)
• Working voltage: 12V
• Effective remote control distance of the remote control: 150m (open area)
• Remote control speed: ≤1 time/second
• Deflated hollow steel needle: φ5mm×43mm
• Weight: 16Kg
• Packing box volume: 630×610×280mm
• Bearing capacity: 20T

4. Matters needing attention

• 1. When in use, it is strictly forbidden to use handboards, kicks, or step on the roadblock blocks to avoid damage to the roadblock or the operator being stabbed by the erected stainless steel hollow needle.
• 2. After each task is performed, the shortage of stainless steel hollow needles or other parts should be filled in time.
• 3. Do not disassemble the connecting parts of the equipment at will. If repair or adjustment is required, please contact the supplier or manufacturer.
• 4. The waterproof function of this remote control car barrier is average. Please do not use it in rainy, snowy or muddy environments for a long time.
• 5. When not in use for a long time, the power box should be charged once a month to prolong the life of the battery and avoid damage to the battery.

5. Attachments

• 1 set of remote control box
• 1pcs control cable
• 1pcs car connection line
• 10pcs hollow needles for deflation (with rubber sleeve)
• 1pcs charging cable
• 1pcs nedle loading tool
• 1pcs user manual