Boom Barrier Infrared Vehicle Parking Lot Ultrasonic Radar Detector Sensor

Description:

Boom Barrier Infrared Vehicle Parking Lot Ultrasonic Radar Detector Sensor is used to control the lifting and lowering of the barrier gate boom to avoid hitting cars or pedestrians. The function is similar to the loop detector, but no wiring is required. Barrier control radar is the latest radar for barrier control developed by WHST with independent intellectual property rights..The radar can intelligently identify pedestrians and vehicles, and preventing the dropping accidents of the barrier gate.

Specifications:

• Model No.: EF-Radar2
• Transmit Power: ≤10mW
• Modulating Type: FMCW
• FOV: 34°× 12°
• Detected Targets: people/vehicle
• Lateral Detection Width: 1m
• Active Distance: 6m(adjustable)
• Reaction Time: 2ms
• On-line debugging: Serial port
• On-line upgrade: Serial port
• Supply Voltage: 9~12V DC
• Supply Current: ≤0.2A
• Power Consumption: ≤2W
• Operating Temperature: -40℃~+85℃
• Operating Humidity: 0~95%RH
• Dimensions (H× W × D): 136mm*112mm*29mm
• Infrared Radar: Simultaneous detection, high chassis + low chassis
• Detector: Install about 100 degrees upward
• Installation height: 20 cm from the ground
• Type: Infrared Radar Vehicle Detector
• Use for: Barrier boom/ gate opener
• H. S. code: 8512301900

Features:

• 1.High performance radar works in 24GHz ISM Band
• 2.Advanced DSP technology, high accuracy & very low false alarm rate
• 3.Distinguish pedestrians and vehicles sensitively
• 4.Avoid dropping accidents of barrier gate
• 5.Simple installation and convenient in maintenance (no pavement 6.damage, easy installation by one person)

Installation steps diagram:

• 1. Unpack and take out the radar product;
• 2. Determine the installation location;
• 3. Drill the fixing hole with an electric drill;
• 4. Screw the radar installation position;
• 5. Final renderings.