2024 New Arm Illuminator LED Strips of Boom Barrier Gate with Red Green Light and Acceleration Sensor
Specification:
Model No.: EF-LEDB01
Product Name: Elefine waterproof LED Strips for Boom of Barrier Gate
Tube Material: Silicone
Power
3M: 8.64W
4.5M: 12.96W
6M: 17.28W
Voltage: 12V, 2A
LED Type: RGB5050 60/m, 10mm Width
Application: Outdoor using for boom barrier gate pole alarming LED light
Lamp Body Material: Silicon glue
CRI (Ra>): 80
Input Voltage (V): 12V
Lamp Luminous Flux (lm): 720-960
Working Lifetime (Hour): 50000
Working Temperature (℃): -20 – 50
Certification: CE, RoHS
Light Source: LED
Support Dimmer: Yes
Lamp Power: 2.88-17.28W
Light Sensor: Yes
Inbuilt Control Panel: Yes
Auto Switch LED Color: Yes
Feature:
1) LED strips inbuilt photosensitive sensor, LED will auto switch on when the environment is dark
2) With control board, when the boom barrier pole is in horizontal status, LED is RED, when vertical, the LED is GREEN
Easy to Install:
1, Drill two holes in 3.2mm diameter for each 50cm on the boom barrier pole, the distance between these two holes is 2~2.5cm (the width of LED strips);
2, Put double-sided tape on the boom barrier pole;
3, Stick the LED strips on the boom barrier pole firmly, hand pressure the LED strips smoothly and hard;
4, Insert the buckles into the hole to fix it;
5, Note that the whole LED strip needs to be fixed on the boom barrier pole.
LED strip schematic diagram:
1, There are acceleration sensors in the control board, no to bend it or it will be damaged
2, LED is a flexible material, but not to twist it and bend to out of shape
3, If the LED strip is too long, it can be cut short to fit for use, but needs using silica gel for water resistance ( not to use glass glue)
Installation site:
Buckles to fix LED light belt on boom barrier pole:
Latest upgrades:
1. The power cord was changed to a waterproof power cord (the waterproof effect is better).
2. No need for the previous CD plug.
3. The lamp beads use 120 lamps, no lamp shadow.
4. The newly upgraded casing is made of silicone, which is durable and does not discolor. The casing is thickened and enlarged.
5. The light strip has passed the collision test and is not damaged.
6. Waterproof, anti-freeze, anti-flame retardant.
7. Bind with cable ties, simple, convenient and practical.
8. Controller: When the pole is flat, the light strip displays red, and when the angle is higher than 30 degrees, the light strip turns green.
9. Light perception: The light does not turn on during the day, but turns on by itself at night. The light does not turn off when the car lights shine on it at night (within one minute).
If the light is required to be on 24 hours a day, you need to wrap the light sensor with black electrical tape so that the light sensor cannot feel the light, and it can work 24 hours a day.
10. The waterproof light strip is equipped with a silicone waterproof plug where the power cord is connected to the chassis.
11. The power cord is white. The end that connects to the light strip is ten centimeters, and the end that comes out of the chassis is 1.6 meters.
12. Now we use a universal controller, 12V and 24V can be used universally.
Package of boom barrier pole LED lighting belt:
1pcs * 4m LED lighting belt (OEM length available);
Download Brochure
